Select Page

Guardian Butylwrap Systems

Butylwrap MP Primer

Butylwrap 1080/1055

GUARDIAN Butylwrap MP Primer systems consist of butyl-based elastomers blended with polymeric resins dissolved in an organic solvent system. They can be used for machine or hand brush applications and provide excellent adhesion to the pipe substrate and cathodic disbandment resistance. Liquid adhesive system is ideal for hand brush application to rough, reconditioned, or grit-blasted pipe surfaces. It provides a uniformly smooth, instant tack surface for coating systems.

Caution: The Butylwrap MP Primer is FLAMMABLE MIXTURES. Store away from heat source. Read all label instructions prior to use. Please request an application specification and storage guideline from Seal for Life.

GUARDIAN Butylwrap is a wraparound corrosion protective coating consisting of one layer of one layer of epoxyprimer and two layers ofPEfilm. It can beusedfor the coatingof pipes, coating of risers, coating of flanges, coating of manholes, coating of valves, underwater coating of riser, coating of welded sockets, repair of all type of coatings, sealing of pipe and cable conduits, sealing of pipe casings.

OTHER APPLICATIONS:

Guardian Butylwrap 1080/1055 is a multilayer system used for the protection of steel pipelines, Liquid Adhesives can be used as primers for this system. The inner layer of Butylwrap 1080 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer (out layer) of Butywrap 1055, achieves a complete bond to the Butywrap 1080 inner layer.

ADVANTAGES

GUARDIAN Butylwrap MP Primer is an excellent adhesion, superior cathodic disbandment resistance and be ensured permanent bond of coating system. Also, it can be conformed to local and national standards.

ADVANTAGES

It can be save time without preheating, super bonding to PE, PP, FBE and AE. Moreover, It is a long shelf-life, impermeableness to water oxygen and superior cathodic disbandment offers the optimum barrier long term protection against corrosion.

Temperature

Environment -20 to +90℃
Pipe surface min.+3℃ above the dew point max.+90℃

Application

Performance SY, AWWA standards
Compatible line coating Carbon steel, FBE, PE, PP, Tape
Max operating temperature 90°C
Recommended pipe preparation Sa2.5 or St3.0

Application

Compatible line coatings PE, PP, FBE, PU, Coal tar, Bitumen
Soil stress restrictions None
Max operating temperature 85°C
Environment temperature range -20°C ~+85°C

PROPERTIES

Property Test Method Value
Color Black
Base Rubber/Resins
Solvent Petroleum spirit
Flash point DIN EN 57 7℃(43℉)
Dry time +23℃/+73.4℉ ≤5min
Solid content ISO 1515 28%
Viscosity (flow time nozzle 4 mm) +23℃/+73.4℉ DIN 53211 25±5s
VOC 0.61kg/L
Consumption 0.08-0.1kg/m2
Operating temperature b -20 to +90℃
Shelf life 3 years

PROPERTIES

Property Backing Test Method Value
Tensile Strength ASTM D 638 18MPa
Elongation ASTM D 638 550%
System properties
Peel strength to primed steel ASTM D 1000 37N/cm Cohesive failure
Dielectric strength ASTM D 149 25kv
Impact resistance ASTM G-14 6.0Nm
Penetration resistance ASTM G 17 < 15%
Cathodic disbandment Resistance ASTM G 8 5.5mm
Volume resistivity ASTM E 257 1.1.7×1017 ohm•cm
Water Absorption ASTM D 570 < 0.04%

PRODUCTS

TYPE Capacity (L) Total Weight (KG)
Canister 5 4.50
Canister 20 18.60

PRODUCTS

(Butylwrap 1080)

Color : Black
Backing 0.25 mm 0.35 mm 0.35 mm 0.50 mm
Adhesive 0.25 mm 0.25 mm 0.35 mm 0.50 mm

Other thickness (0.5~1.4mm) are available, Please note when place order.

(Butylwrap 1055)

Color : Black or white
Backing 0.25 mm 0.35 mm 0.35 mm 0.65 mm
Adhesive 0.15 mm 0.15 mm 0.15 mm 0.15 mm

Other thickness (0.5~1.4mm) are available, Please note when place order.